Oricom UHF400R User Manual

15
Operations
PRIORITY SCAN
MO / TSQID / CALPRI / LO SC / MEM F/ DPX
MENU
QUIET
ALPHA
OS / GS
Allows you to monitor a Priority Channel while scanning other channels in
memory.
Memory On/Off
Push and hold the SC/MEM button for 2 seconds, "M" will appear above the
selected channel. Press SC/MEM button to remove scan memory from the
selected open scan mode.
MO / TSQID / CALPRI / LO SC / MEM F/ DPX
MENU
QUIET
ALPHA
OS / GS
Instant Memory
To save a channel to instant memory location select the channel to be saved
include any CTCSS or DCS settings. Press the 200RX button for 2 seconds then
press and hold the required ‘I’ button.
The buttons have been preprogrammed with the following I1 CH1, I2 CH12, I3
CH5, I4 CH20, I5 CH40.
Selcall
Selcall or Selective Calling is a function that allows you to selectively call another
radio, using a unique ID number. Your radio has 10 programmable Selcall ID
memories. The ID memories are displayed as "C0 to C9". Here you will program
Selcall ID numbers of other radios.
Your Radio’s Selcall Identication number is preset "12345". You must change
this number to your own unique ve digit Selcall ID number.

Oricom UHF400R Specifications

General

Brand	Oricom
Model	UHF400R
Category	Radio
Language	English