20
Operations
• Automatically responds to the caller by transmitting Acknowledge tones.
• Informs you that a caller is on the channel by emitting CALL Alarm and
displays FROM icon.
Menu Functions
The MENU feature provides a convenient method of customizing some of the
radio’s functions. The following Menu Options are available. Note that some
items are only available on certain channels.
To access the Menu functions
1. Briey press the F/DPX button, then the MENU button. The rst Menu
function is displayed.
2. Briey press the SC/MEM button to cycle through each available function.
After the last function has been selected, the cycle returns to the beginning.
3. Rotate the Channel knob to alter the parameters of the selected function.
4. Briey press F/DPX button and then press Menu button to exit and store any
changes.
Third functions
• If you change value of each setting. Use up and down key.
• If you change functions. Use Scan key to select next function.
• If a button is not pressed within 8 seconds the Radio will automatically exit
the menu mode.
• The menu button allows you to make a number of conguration changes.
CTCSS_DCS Select 38 CTCSS or 104 DCS code
LIGHT Select briht and dimmer
COLOR Select Green or Orange LCD Backlight colour
BEEP Select Key beep sound On or Off
BCL Select Busy channel lock On or Off
ST TIME Select Scan restart time
RGB_B Select Roger beep On or Off
To Next Page
Loading...
Need help?
General
