Oricom UHF400R User Manual

19
Operations
1234 1 123 01'
1234 2 123 02'
1234 3 123 03'
UP TO UP TO
1234 9 123 99'
QUIET Mode (Q)
Puts the receiver in the Q mode. When activated, the radio prevents any
unwanted conversations in the channels from being heard unless the call is
specically directed to you and the Selective call ID required to open the Q mode
condition has been received.
Under this condition, the PTT button is temporarily disabled.
If you wish to use the same Channel for normal communication, simply remove
the Channel from Q mode.
MO / TSQID / CALPRI / LO SC / MEM F/ DPX
MENU
QUIET
ALPHA
OS / GS
Setting up QUIET Mode
To setup QUIET mode you must rst ‘tag’ the channels that you want to stay
quiet, then activate the QUIET mode. Once QUIET mode is activated, the
channels you have tagged will remain quiet to all incoming signals unless your
Selcall Ident is received. Channels not tagged will remain open to all signals and
will operate normally.
1) Select the channel you want to put in "Q" mode using the channel selector.
2) Briey press F/DPX and then Quiet button. A beep is heard and the Q icon
appears on the LCD display.
3) While in Q mode condition, when the radio receives a code matching your ID,
it will perform the following operations:

Oricom UHF400R Specifications

General

Brand	Oricom
Model	UHF400R
Category	Radio
Language	English