Oricom UHF400R User Manual

14
Operations
Scanning
The radio SCAN function has the ability to allow programmable channels to be
scanned for groups of users.
Channels can be scanned (40 channels per 5 seconds). When a signal is found,
scanning will stop at that channel to allow the signal to be heard, then resume
scanning when the channel is clear again.
Scan Modes
The Radio features three scan modes - Open Scan, Priority Scan and Memory
Scan.
Open Scan
The Open Scan feature scans for activity on all CB channels. Once a channel
is located, scanning will pause to allow the signal to be heard. As soon as the
channel is clear for 5 seconds, scanning will continue automatically.
Open Scan
Priority Scan
With Priority Scan the Radio scans for activity, but in addition, it also inserts your
Priority Channel into the scan sequence.
This means that your Priority Channel will be monitored regularly while scanning
to ensure that no calls are missed. Any signals received on your Priority Channel
will take precedence over any signals received on the other channels.
Instant Scan
During Open Scan press and hold SC/MEM button to start Instant Scan, only
the channels programmed in the instant channel buttons with 'M' set will be
scanned. To stop scan press the SC/MEM button or Push PTT.

Oricom UHF400R Specifications

General

Brand	Oricom
Model	UHF400R
Category	Radio
Language	English