22
As soon as the channel is clear for the time set in the scan delay time,
scanning will continue automatically.
Priority Scan (GS) Mode
With Priority Scan the Radio scans for activity, but in addition, it also
inserts your Priority Channel into the scan squence.
This means that your Priority Channel will be monitored regularly while
scanning to ensure that no calls are missed. Any signal received on
your Priority Channel will take precedence over any signals received on
the other channels.
The priority channel will be checked after every 4th channel scanned.
Transmit RF Power Control
The maximum RF transmit power of UHF5500 is 5 watts.
To switch to low power, select low power in menu mode. Low indicator
will appear in the display.
VOX Sensitivity Level Setting
In VOX mode, the radio will transmit a signal only when it is activated
by your voice or other sound around you. The unit will transmit for the
time set in VOX delays the after you have stoped talking.
The level of VOX sensitivity is shown by a number on the LCD screen
(Off to 15 levels).
Open Scan
PRIORITY SCAN
Operations
......
To Next Page
Loading...
Need help?
General
