BTP-R580 USER MANUAL
- 18 -
2） Description of LED and Error Status
Error information ERROR LED PAPER LED Buzzer
Print head is
overheating
Six times Off Long-Short-Long
Input voltage is
abnormal
Five times Off Short-Short-Long
Cutter Error Four times Off Long-Short-Long
Cover Is Open Three times Off Short-Long-Short
Paper End Twice On Short-Short-Short
Paper near end Off On
Finding mark error or
verify failed
Flashing
continuously
Off
Table 3.2-2
Caution:
The temperature of the print-head is detected by means of a
thermistor sensor. If the temperature of the printhead becomes
higher than 65
0
C, the protection circuit of the printer will force
the printer to stop printing.
To Next Page
Loading...