BTP-R580 USER MANUAL
- 28 -
3) Wipe off stain or dust from the surface of sensors by using a
soft cotton swipe impregnated with pure alcohol.
4) Close the top cover of the printer after the alcohol has
evaporated completely.
5.3 Clearing of a paper jam
Remove the paper, if one of the following phenomena occurs:
The printer fails to feed out paper normally.
Paper is feeding with load noise.
The steps for removing paper are as below:
1) Switch off the printer.
2) Open the top cover of the printer.
3) If the paper is jammed in the paper path, remove the wrinkled
or wasted part of the paper roll.
4) Close the printer top cover.
To Next Page
Loading...