Oriental motor BLM Series - Page 3

3
■
Information about nameplate
Motor model
Manufacturing date
Serial number
Motor
specication
■
Drivers possible to combine
Products with which the motors can be combined are listed below.
z
BMU
Series
Output
power
Motor
model
Driver model
Single-phase 100-120 VAC
Single-phase 200-240 VAC
Three-phase 200-240 VAC
30 W
BLM230 BMUD30-A2 BMUD30-C2
60 W
BLM460S
BLM260
BMUD60-A2 BMUD60-C2
120 W
BLM5120 BMUD120-A2 BMUD120-C2
200 W
BLM6200S
BLM5200
BMUD200-A BMUD200-C
300 W
BLM6300S
BLM5300
－
BMUD300-C
400 W
BLM6400S
BLM5400
－
BMUD400-S


The power supply voltage is three-phase 200-240 VAC only.
z
BLE2
Series
Output
power
Motor
model
Driver model
Single-phase 100-120 VAC
Single-phase 200-240 VAC
Three-phase 200-240 VAC
30 W
BLM230 BLE2D30-A BLE2D30-C
60 W
BLM460S
BLM260
BLE2D60-A BLE2D60-C
120 W
BLM5120 BLE2D120-A BLE2D120-C
200 W
BLM6200S
BLM5200
－
BLE2D200-C
300 W
BLM6300S
BLM5300
－
BLE2D300-C
400 W
BLM6400S
BLM5400
－
BLE2D400-S


The power supply voltage is three-phase 200-240 VAC only.
■
Connection cable (sold separately)
To connect the motor and driver, the dedicated connection cable (sold
separately) is needed.
The distance between the motor and driver is up to 20 m (65.6 ft.). The cable
length that can be connected vary depending on the driver used. Check the
operating manual included with the driver.
Model name and type
Cable outlet direction
F : Output shaft direction
B : Opposite to output shaft
direction
V : Vertical direction
Output shaf
t direction:
CC_____
F
Opposite to output shaft
direction: CC_____B
Vertical direction:
CC_____V
Cable length
005 : 0.5 m (1.6 ft.)
010 : 1 m (3.3 ft.)
015 : 1.5 m (4.9 ft.)
020 : 2 m (6.6 ft.)
025 : 2.5 m (8.2 ft.)
030 : 3 m (9.8 ft.)
040 : 4 m (13.1 ft.)
050 : 5 m (16.4 ft.)
070 : 7 m (23.0 ft.)
100 : 10 m (32.8 ft.)
150 : 15 m (49.2 ft.)
200 : 20 m (65.6 ft.)
: Cable classication
CC 005 HBL F
For the round shaft type motor, select the cable outlet direction in
consideration of the installation.
■
Names of parts
Motor
Mounting hole
(4 places)
Protective Earth Terminal
120 W, 200 W
300 W, 400 W
Motor
Gearhead
Output
shaft
Connector for cable
connection
Protective Earth Terminal
30 W, 60 W
Connection cable (sold separately)
Connector for
motor connec
tion
Ground terminal
Power connector
(white)
Sensor connector
(black)
Connectors for
driver connection