Oriental motor BLM Series - Regulations and Standards

8

Unauthorized reproduction or copying of all or part of this manual is
prohibited.

Oriental Motor shall not be liable whatsoever for any problems relating
to industrial property rights arising from use of any information, circuit,
equipment or device provided or referenced in this manual.

Characteristics, specications and dimensions are subject to change without
notice.

While we make every eort to oer accurate information in the manual,
we welcome your input. Should you nd unclear descriptions, errors or
omissions, please contact the nearest oce.

is a registered trademark or trademark of Oriental Motor Co.,
Ltd., in Japan and other countries.
© Copyright ORIENTAL MOTOR CO., LTD. 2016
Published in January 2020
T
echnical Support Tel:(800)468-3982
8:30
A.M. to 5:00 P.M., P.S.T. (M-F)
7:30
A.M. to 5:00 P.M., C.S.T. (M-F)
www
.orientalmotor.com
Schiessstraße 44, 40549 Düsseldor
f, Germany
T
echnical Support Tel:00 800/22 55 66 22
www
.orientalmotor.de
T
el:01256-347090
www
.oriental-motor.co.uk
T
el:01 47 86 97 50
www
.orientalmotor.fr
T
el:02-93906346
www
.orientalmotor.it
T
el:+55-11-3266-6018
www
.orientalmotor.com.br
• Please contact your nearest Oriental Motor oce for further information.
4-8-1Higashiueno
,Taito-ku,Tokyo 110-8536
Japan
T
el:03-6744-0361
www
.orientalmotor.co.jp
Tel:0800-060708
www.orientalmotor.com.tw
Singapore
Tel:1800-8420280
www.orientalmotor.com.sg
Tel:1800-806161
www.orientalmotor.com.my
Korea
Tel:080-777-2042
www.inaom.co.kr
Tel:1800-888-881
www.orientalmotor.co.th
Tel:400-820-6516
www.orientalmotor.com.cn
Tel:+91-80-41125586
www.orientalmotor.co.in
Hong Kong Branch
Tel:+852-2427-9800
Regulations and standards
■
UL Standards and CSA Standards
This product is recognized by UL under the UL and CSA standards.
The motor model name represents the model that conforms to the standards.
Applicable Standards Certication Body Standards File No.
UL 1004-1
CSA C22.2 No.100
UL E335369

Thermal class UL/CSA Standards: 105(A)
■
CE Marking
This product is axed the CE Marking under the Low Voltage Directive.
The motor model names are the models conform to the directive (CE Marking).
z
Low Voltage Directive

This product is designed and manufactured to be incorporated in equipment.

This product cannot be used in IT power distribution systems.

Install the product within the enclosure in order to avoid contact with hands.

Ground the Protective Earth Terminals for the motor (or connection cable)
and driver securely.

Isolate the connection cable, power-supply cable and other drive cables from
the signal cables by means of double insulation.
Applicable Standards
EN 60034-1, EN 60034-5, EN 60664-1
Installation conditions (EN Standard)

For incorporating in equipment

Overvoltage category:
Ⅱ

Pollution degree: 3

Protection against electric shock: Class
Ⅰ

Thermal class EN Standards: 120(E)
z
Motor temperature rise tests
The temperature rise tests stipulated in the above standards are conducted
in a state where a motor is mounted on a heat radiation plate instead of
attaching a gearhead. The size, thickness and material of the heat radiation
plates are as follows.
Model Size [mm (in.)] Thickness [mm (in.)] Material
BLM230
115×115 (4.53×4.53)
5 (0.20)
Aluminum
alloy
BLM260
BLM460S
135×135 (5.31×5.31)
BLM5120
165×165 (6.50×6.50)
BLM5200
BLM6200S
200×200 (7.87×7.87)
BLM5300
BLM5400
BLM6300S
BLM6400S
250×250 (9.84×9.84) 6 (0.24)
■
RoHS Directive
The products do not contain the substances exceeding the restriction values of
RoHS Directive (2011/65/EU).