Oriental motor BXSD200-C2 User Manual

HP-5124
Brushless Motor
BX
Ⅱ
Series
USER MANUAL
Thank you for purchasing an Oriental Motor product.
This Manual describes product handling procedures and safety precautions.
•
Please read it thoroughly to ensure safe operation.
•
Always keep the manual where it is readily available.

Oriental motor BXSD200-C2 Specifications

General

Brand	Oriental motor
Model	BXSD200-C2
Category	Engine
Language	English

Summary

Entry

Safety Precautions

Crucial safety guidelines for product operation and handling to prevent injury.

Installation and Connection

Installation

Procedures for physically mounting the motor and driver according to environmental and mounting requirements.

Connection

Wiring the motor, driver, power supply, and I/O signals according to connection examples.

Connection Method for Each Control Mode

How to Use the Operation Panel

Explanation of the Function Mode (Speed Control Mode)

Details on navigating and operating the driver in speed control mode via the panel.

Explanation of the Function Mode (Position Control Mode)

Details on navigating and operating the driver in position control mode via the panel.

Parameter List

Operation Data

Parameter List

Comprehensive list of all configurable parameters, their settings, and applicability by control mode.

Operation in Speed Control Mode

Operation

How to start, stop, change rotation direction, and perform multi-speed operations.

Operation in Position Control Mode

Positioning Operation

Return-to-Home Operation

How to Use MEXE02

Setting the Operation Data

Using MEXE02 software to configure operational data for the driver.

Setting the Parameters

Monitor

Inspection, Troubleshooting, and Remedial Actions

Alarms, Warnings

Troubleshooting and Remedial Actions

Common issues, possible causes, and corrective actions for motor/driver problems.