Page 17
14) Click “Ok” to shut down your computer once the activation has completed.
15) Power on your computer once it has completed shutdown and wait for the “SecureDoc Boot
LogOn” to appear.
16) Type the administrator username you chose in “Step 11” and press “Enter”. Then whenprompted
type the administrator password you chose in “Step 11” and press “Enter”. Providing you have
entered the correct authentication details the Enigma SED hard drive will be unlocked and the
operating system on your computer will begin booting.
With the hardware encryption activated, every time you power on your computer you will be presented
with the “SecureDoc Boot LogOn” and asked to enter your authentication credentials. The administrator
credentials you have created allow you full control over the management of the Enigma SEDs hardware
encryption, including adding/removing users and enabling/disabling the encryption authentication. If you
wish to use the computer in a multi-user environment or limit user access rights to the management
console, you must create additional users. For details on how to do this please consult the MySecureDoc
Express user manual located on the Enigma SED Installation CD-Rom.
To Next Page
Loading...
General