Need help?Do you have a question about the Origin Enigma and is the answer not in the manual?
General| Category | DC Drives |
|---|---|
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Input Voltage | 200-480 VAC ±10%, 50/60 Hz |
| Output Current | Up to 2000 A |
| Power Rating | Up to 1000 HP (746 kW) |
| Control Method | Digital Microprocessor Control |
| Communication Interface | Modbus RTU, Ethernet/IP, Profibus DP (Optional) |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overload, Overtemperature, Short Circuit, Phase Loss |
| Cooling Method | Forced Air Cooling |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 5% to 95% non-condensing |
| Enclosure Rating | IP20 (NEMA 1) |
Guides the user through cloning their existing drive to the Enigma SED.
Instructions for installing the Acronis True Image HD software.
Instructions for connecting the Enigma SED via USB.
Guides setting up the username, password, and hint for the administrator.
Final step to activate the Enigma SED's hardware encryption.
Explains the boot logon screen for entering credentials.
Details how to enter username and password to unlock the drive.
To Next Page