Orion 150 HCCA - About this Manual; Whats in the Box; Technical Design Features

ABOUT THIS MANUAL
This manuat is divided into different sections for different needs.
Whether you are the owner, salesperson or installer, we have devolod
ii section of this manual to answer your questions. If you have not
decided on a system design, refer to the "SYSTEM PLANNING" section
of this manual for awesome system ideas. For quick installation
references, please refer to the "QUICK REFERENCE INSTALLATION"
section of this manual.
We at ORION strive to give you the latest up to date information
about this product. If you have question regarding the installation,
set up or tuning of this product, please refer to your nearest
Authorized ORION Dealer for assistance. The direct access to ORION't
Technical Support Hotline is 1-800-315-2080.
WHAT'S IN THE BOX
Listed below are the components included in this system package
TECHNICAL DESIGN FEATURES
• Dual PRS MOSFET power supply- (Pulse Regulated Supply)
The heart of the 150 HCCA amplifier. It supplies the power
needed to reproduce the music. Music is not a continuous
demand but a dynamic demand. The PRS power supply allows
the 150 HCCA to quickly react to current demands created by
musical transients. The PRS supply has a low output impedance
for superior damping control and stability during voltage
fluctuations for continuously reliable performance in the harsh
automotive environment.
• Complimentary matched Bl-polar outputs Thel 50 HCCA
amplifier uses complimentary bi-polar output devices. These
complimentary devices are symmetrically matched to ensure the
output section behaves in a ultra-linear fashion. When outputs
are not precisely matched, the result is non-linear clipping of the
amplifier that causes audible distortion when running the
amplifier at near maximum output capabilities.
quantity
1
2
1
1
1
4
2
description
150 HCCA amplifier
DVX 2 Crossover Modules
installation and operation manual
8 gauge power and ground connector
12 gauge speaker and remote connector
#8 self-tapping black Phillips pan head screws
40 Amp ACT fuse
• Four Module Slots with dual DVX-2 Modules- The 150 HCCA
is equipped with four module slots for unlimited system
flexibility. Dual DVX ^ Modules creates ultimate system flexibility
with the ability to create 12dB/Octave or 24dB/Octave high-pass
or low-pass filters or 12dB/Octave band pass filters.
• internal Signal routing and Summing- The Input signal can
be routed back out the amplifier via the DIN plug or RCA jacks.
The signal can be routed through the internal DVX-2 modules or
be configured for full-range output. The signal can also be
summed mono for subwoofer applications.
• MASTEB/SLAVE- The internal gain stage of the amplifier can be
bypassed so that one master amplifier can be used to control the
gain of a slave amplifier. This operates on channels 1 & 2. This
system can be used with multiple low-frequency amplifiers to
perfectly level match the system.
• Direct Drive- The gain stage of the amplifier can be bypassed
for improved sound and a 10dB increase in signa!-to-noise ratio.
2