Orion 150 HCCA - Page 9

4£2 minimum 0.5£1 minimum
• Channels 3 & 4 are configured for two channel stereo operation.
Lowest recommended impedance is 0.5Q per channel.
• Channels 1 & 2 are configured for a single channel bridged out¬
put. Lowest recommended impedance is bridged mono.
• Crossover, output and gain configuration are independently
adjustable between the front and rear channels.
• 2 Channel or 4 Channel input can be used for this configuration.
For source unit fading, used the 4 channel input mode.
4n minimum
in minimum
• Channels 1 & 2 and 3 & 4 are configured for bridged mono oper¬
ation.
• Lowest recommended impedance for channels 1 & 2 is 4£2
bridged-mono.
• Lowest recommended impedance for channels 3 & 4 is 1£i
bridged mono.
• Crossover output and gain configuration are independently
adjustable between the front and rear channels.
• 2 Channel or 4 Channel input can be used for this configuration.
For source unit fading, used the 4 channel input mode.