Summed Bridged Configuration
● Lowest recommended impedance is 4W bridged mono.
● Mono or stereo input can be used for this configuration.
● Outputs can be configured for high-pass, low-pass, or full range operation.
● Output is configured as summed bridged which is ideal for subwoofer applications.
Single Channel Bridged Configuration
● Lowest recommended impedance is 4W mono.
● Mono input must be used for this configuration. Only the Left input is used.
● Outputs can be configured for high-pass, low-pass, or full range operation.
● Outputs are configured for single channel bridged operation which is ideal for
separate left or right channel subwoofer applications.
11
©2004 Directed Electronics, Inc.
To Next Page
Loading...
Need help?
General
