Do you have a question about the Orion Cobalt CB1000.4 and is the answer not in the manual?
Channels | 4 |
---|---|
Power Output (RMS) | 1000 W |
RMS Power @ 4 Ohms | 125 W x 4 |
RMS Power @ 2 Ohms | 250 W x 4 |
RMS Power @ 4 Ohms Bridged | 500 W x 2 |
Minimum Impedance Unbridged | 2 Ohms |
Minimum Impedance Bridged | 4 Ohms |
Input Sensitivity | 200mV - 6V |
Crossover Type | LP/HP/Full |
Bass Boost | 0-12 dB |
Bass Boost Frequency | 45 Hz |
Crossover | Variable |
Covers warranty periods, purchase conditions, and claim requirements.
Lists what is not covered and the procedure for warranty service.
Welcomes the user and emphasizes reading instructions for optimal performance.
Provides essential advice on mounting, ventilation, and wiring for installation.
Instructs users to record product identification for warranty.
Illustrates front panel layouts for various amplifier models and their controls.
Lists and briefly describes essential amplifier control functions.
Covers power supply, ground, and remote turn-on connections.
Outlines critical precautions for safe installation and operation.
Provides solutions for common operational problems like no sound or protection mode.
Guides on replacing fuses and understanding the protection circuit.
Shows how to connect speakers and power in stereo mode for 4-channel models.
Illustrates stereo speaker and power connections for 2- and 5-channel models.
Illustrates stereo speaker connections for various amplifier series.
Shows how to wire speakers in bridged mode for different amplifier types.
Details speaker connections for 4-channel models like CB3000.4.
Illustrates speaker connections for 2-channel models (CB300.2, CB600.2, CB1200.2, CB2700.2).
Shows speaker connections for 5-channel models (CB1500.5, CB2700.5).
Illustrates speaker connections for mono 1-ohm amplifiers (CB1000.1M2, CB1000.1D, CB1500.1D).
Details speaker connections for CB2500.1D and CB3500.1D amplifiers.
Shows speaker connections for the CB1500.1D2 amplifier.
Illustrates bridged mode speaker connections for 4-channel amplifiers.
Details bridged mode wiring for the CB3000.4 amplifier.
Shows bridged mode speaker connections for 2-channel amplifiers.
Illustrates bridged mode speaker connections for 5-channel amplifiers.
Details connecting two CB1000.1D/1500.1D/2500.1D/3500.1D amps in bridged mode.
Explains the master/slave configuration for bridged mono amplifiers.
Details master/slave bridged wiring for the CB5000.1D amplifier.
Shows master/slave bridged wiring for CB1500.1D2 and CB2500.1D2 amplifiers.
Illustrates the power connection leads from the battery to the amplifier.
Provides detailed instructions for power, ground, remote, and audio input connections.
Guides on turning on the amplifier, LED indicators, and gain adjustment.
Offers essential tips and guidelines to prevent audio interference.
Lists detailed technical specifications for 4-channel amplifier models.
Provides technical specifications for 2-channel amplifier models.
Lists technical specifications for 5-channel amplifier models.
Provides technical specifications for the Class AB Mono 2-Ohm amplifier.
Lists technical specifications for Class D Mono 1-Ohm amplifiers.
Continues listing technical specifications for Class D Mono 1-Ohm amplifiers.
Provides technical specifications for Class D Mono 2-Ohm amplifiers.