Need help?Do you have a question about the Orion XTREME 1200 and is the answer not in the manual?
General| Input Sensitivity | 200mV - 6V |
|---|---|
| Frequency Response | 10Hz |
| S/N Ratio | >90dB |
| Bass Boost | 0dB |
| Fuse Rating | 40A |
| Impedance | 2 Ohms |
| Signal-to-Noise Ratio | >90dB |
Details the terms, conditions, and exclusions of the product warranty.
Further warranty exclusions and legal rights information.
Illustrates power connection requirements for the XTREME amplifier series.
Specific power connection diagram and guidelines for the XTREME 1200.
Overview of the amplifier's continuously variable crossover section.
Fine-tuning the low-pass crossover frequency settings.
High-pass crossover settings for different speaker types and INTELLI Q.
Provides a detailed, step-by-step procedure for installing the amplifier.
Steps for testing the installed system and ensuring proper operation.
Instructions for adjusting system sound levels and fine-tuning audio output.
Common symptoms, probable causes, and actions for troubleshooting amplifier issues.
Continued troubleshooting tips for common amplifier problems like poor bass and fuse blowing.
Logical troubleshooting method for car audio systems, focusing on noise issues.
Detailed steps for identifying and resolving noise problems in car audio systems.
To Next Page
