Do you have a question about the Orion Cobalt CB1500.4 and is the answer not in the manual?
Details warranty period, claims process, and what is not covered.
Introduces the amplifier and the purpose of the manual.
Covers mounting, wiring, power, and ground connection best practices.
Instructions for recording key details for warranty.
Displays and labels controls for various amplifier models.
Lists and briefly defines key controls like Input Mode and Gain.
Covers startup, LEDs, level control, and filter functions.
Advises on installation environment, voltage, and overload protection.
Addresses common issues, solutions, and fuse replacement guidance.
Illustrates connections for 4-channel amps.
Illustrates connections for 2-channel amps.
Illustrates connections for mono amps in stereo mode.
General diagrams for 4-channel speaker connections.
Wiring diagrams for 2 and 5-channel models.
Wiring diagrams for various mono models.
Wiring diagrams for various mono models.
Specific model diagrams for speaker connections.
Diagrams for 4-channel bridged setup.
Diagrams for 2 and 5-channel bridged setups.
Master/Slave setup diagrams for mono amps.
Master/Slave setup diagrams for mono amps.
Master/Slave setup diagrams for mono amps.
Details +12V, REM, and GND lead connections.
Covers speaker and input wiring best practices.
Covers LEDs, level control, and filter functions.
Guidelines for cable routing and noise reduction.
Power ratings, frequency response, etc. for 4-channel models.
Power ratings, frequency response, etc. for 2-channel models.
Power ratings, frequency response, etc. for 5-channel models.
Power ratings, frequency response, etc. for Class AB mono.
Power ratings, frequency response, etc. for Class D mono 1 Ohm.
Power ratings, frequency response, etc. for Class D mono 1 Ohm.
Power ratings, frequency response, etc. for Class D mono 2 Ohm.
Details warranty period, claims process, and what is not covered.
Introduces the amplifier and the purpose of the manual.
Covers mounting, wiring, power, and ground connection best practices.
Instructions for recording key details for warranty.
Displays and labels controls for various amplifier models.
Lists and briefly defines key controls like Input Mode and Gain.
Covers startup, LEDs, level control, and filter functions.
Advises on installation environment, voltage, and overload protection.
Addresses common issues, solutions, and fuse replacement guidance.
Illustrates connections for 4-channel amps.
Illustrates connections for 2-channel amps.
Illustrates connections for mono amps in stereo mode.
General diagrams for 4-channel speaker connections.
Wiring diagrams for 2 and 5-channel models.
Wiring diagrams for various mono models.
Wiring diagrams for various mono models.
Specific model diagrams for speaker connections.
Diagrams for 4-channel bridged setup.
Diagrams for 2 and 5-channel bridged setups.
Master/Slave setup diagrams for mono amps.
Master/Slave setup diagrams for mono amps.
Master/Slave setup diagrams for mono amps.
Details +12V, REM, and GND lead connections.
Covers speaker and input wiring best practices.
Covers LEDs, level control, and filter functions.
Guidelines for cable routing and noise reduction.
Power ratings, frequency response, etc. for 4-channel models.
Power ratings, frequency response, etc. for 2-channel models.
Power ratings, frequency response, etc. for 5-channel models.
Power ratings, frequency response, etc. for Class AB mono.
Power ratings, frequency response, etc. for Class D mono 1 Ohm.
Power ratings, frequency response, etc. for Class D mono 1 Ohm.
Power ratings, frequency response, etc. for Class D mono 2 Ohm.
| Channels | 4 |
|---|---|
| RMS Power @ 4 Ohms | 150W x 4 |
| Signal-to-Noise Ratio | >90dB |
| Minimum Impedance Unbridged | 2 Ohms |
| Minimum Impedance Bridged | 4 Ohms |
| Input Voltage | 14.4V |
| Input Sensitivity | 200mV - 6V |
| Crossover Type | Variable |
| Low Pass Crossover Frequency | 50Hz - 250Hz |
| High Pass Crossover Frequency | 50Hz - 250Hz |
| Bass Boost | 0-12dB |
| Bass Boost Frequency | 45Hz |
| Frequency Response | 10Hz |
| Fuse Rating | 40A |












Loading...