20 Orion LX Weather Station
____________________________________________________________________
Mounting Adapter
To facilitate easy installation and north alignment, the Orion 510 Sensor
Transmitter comes standard with a mounting adapter. The mounting
adapter is easily connected on the end of the mast and the sensor
transmitter simply snaps into it. The north alignment needs to be
performed only once.
Internal Terminal Block
The sensor transmitter is shipped with a one (1) foot cable terminated by
an 8-pin connector half.
This cable is connected to the sensor transmitter via a terminal block.
The Orion sensor transmitter has a standard RS-232 wiring as shown
bellow:
To Next Page
Loading...