Orion LX Weather Station - Network Setup

Orion LX Weather Station 53
___________________________________________________________________
Columbia Weather Systems, Inc.
Network Setup
Network Setup page allows the user to change the IP address, subnet
mask, gateway, and DNS Server settings.
The MicroServer factory settings are as follows:
IP address 192.168.0.50
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
DNS Server: 192.168.0.1
If the network subnet mask, gateway or DNS server settings are other
than above, the MicroServer settings must be changed to match the
network in order for the MicroServer to be visible to the network.
To change the MicroServer network settings:
1. Connect the MicroServer to a stand-alone computer (not
connected to the network) via a crossover Ethernet cable.
2. Change the computer network settings to match the MicroServer
settings shown above. Contact Network Administrator for
assistance.
3. Browse the MicroServer at http://192.168.0.50
4. In the Orion User Interface, click on Network Setup and change
the settings to match your network.
5. Click on Apply Changes.
6. Disconnect the MicroServer from the stand-alone computer and
connect it to the network.
7. Browse the MicroServer from the network to verify that the
changes are successful.