Orion LX Weather Station - Connecting the Microserver

To Next Page

To Previous Page

Orion LX Weather Station 35

___________________________________________________________________

Columbia Weather Systems, Inc.

For heated sensor transmitters, connect the brown wire along with the

red wire to position 1 and connect the blue wire along with the white and

bare to terminal 2.

Connecting the MicroServer

Using the provided RS-232 cable, connect serial port 1 or 2 on the Orion

Interface Module to COM 1 of the MicroServer.

Using the provided Ethernet cable, connect the Ethernet port on the

MicroServer to the network (router).