Orion Pulse Arc Welding Workbook
32
bristles are extended and retracted by twisting the top.
GENERAL CLEANING GUIDELINES: Be sure to only perform cleaning on the Orion when it is switched off and unplugged.
Never use abrasive cleaning implements on any part of the Orion. Do not blow compressed air into any part of the Orion
as this may damage the internal components. Never use any chemicals besides mild detergents on any part of the Orion.
Always clean the Orion’s parts indirectly by moistening or spraying a soft cloth first, and then use only the cloth to perform
the cleaning.
STYLUS AND HAND ATTACHMENTS: If discoloration appears at the end of the stylus or hand attachment, it can be wiped
off using a moistened cloth.
CABLES AND CORDS: Detach cables and cords from the Orion and wipe them off using a moistened cloth.
ORION’S CASE AND LCD SCREEN: Wipe gently with a moistened cloth being careful not to let any moisture into the air
vents.
To Previous Page
Loading...
Need help?
General
