Orion SC200 - Page 12

› Schedule Record
1. Right-click camera in LAN and select Set Local
Video Plan.
2. Select the day of the week and select Add to
add period when camera commences video
recording. Select 24*7 to enable continuous
recording.
3. Select Apply to complete schedule recording
setup.
› Motion Detect Record
1. Select Setting button
and select
Local Alarm
Plan
tab.
• Select Local alarm record to enable video record
onto local PC when alarm is triggered. Enter the
length of the video recording.
• Select Local alarm capture to enable photo
snapshot onto local PC when alarm is triggered.
Enter the delay between alarm trigger and photo
snapshot.
• Select Local alarm music to enable sound
notification when alarm is triggered. Select
sound file.
2. Select OK to complete setup.
3. Select
Motion Detect
on bottom toolbar.
4.
Alarm sensitivity determines the amount of
movement that triggers motion alarm. Select
suitable alarm sensitivity. Select New Detection
Area
to determine the area of the video that
detects movement.
PROFESSIONAL
SURVEILLANCE SYSTEM
12
WIRELESS IP CAMERA SC200