Orion SC200 - Wifi Setting; Video Monitoring

11 VIDEO MONITORING
12 RECORD MODE
10 WI-FI SETTING
› VIDEO MONITORING FUNCTION IS
INCLUDED LISTEN, VIDEO, CAPTURE,
SETTING AND CLOSE FUNCTION BUTTONS:
Wi-Fi connection can be set up using SYSM Monitor
on computer. Before commencing Wi-Fi setup, the
computer and camera must be connected to the
same router or modem.
1. Select LAN, right-click camera and select
Set WIFI connection.
2. Start Wi-Fi setting, select Scan to search for Wi-Fi
connection and enter Wi-Fi password. Enable
DHCP and select OK to complete Wi-Fi setup.
3. Unplug camera Ethernet cable and disconnect
from camera by right-clicking camera video and
selecting Close. Re-establish connection by
double-clicking camera name. If camera does not
appear, right-click anywhere on the LAN box and
select Refresh. Camera is ready to be wirelessly
using smartphone, tablet or computer.
› Record Folder
Video recordings and photo snapshots are stored
in a specified folder. Select Setting button
and
select Monitor tab.
› Manual Record
Select Photo Capture to take photo snapshot
into specified folder.
Select Video Record
to start video record into
specified folder.
Optical Zoom
Digital Zoom
Aperture Switch
Capture Photo
Record Video
Listen
Talk
Motion Detect
Horizontal Pan
Vertical Tilt
Go to Preset Position
Set to Preset Position
Set Pan/Tilt Speed
Vertical Flip
Mirror
Cruise
Alarm Log
Setting
PROFESSIONAL
SURVEILLANCE SYSTEM
11
WIRELESS IP CAMERA SC200
CPIN002642/2