5. Select Apply to complete motion alarm setup.
6. Camera is ready to detect movement in the
video and commence video recording. Note that
controlling the camera pan/tilt motion will trigger
motion detect alarm as it detects movement in
the video.
1. Select
Playback button on top toolbar to
open Playback menu.
2. Select Playback to search for recordings. Search
for specific recording by selecting start time and
end time.
3. Double-click any file to play recording.
Video can be recorded directly onto a micro SD
card which is installed on the camera to record
video without the use of computer, tablet or PC.
Camera supports micro SD card with storage
capacity of up to 32GB.
› Configuring SD Card
1. Obtain a micro SD card
and remove all files by
formatting the card on
a computer.
2. Insert the card into the
slot on the rear panel
of camera.
3. Restart the camera by
turning off and on the
power supply.
4. Open the SYSM
Monitor
software, right-click on camera in LAN
and select SD Card Configuration.
5. Check whether the camera detects micro SD card
by checking storage capacity.
13 VIDEO PLAYBACK
14 SD CARD
Check the recording options to enable recording.
Select Format SD Card to clear all files from card.
6. Select Apply to complete setting.
› Viewing SD card Recordings
1. Open the SYSM
Monitor
software,
right-click on camera
in LAN/WAN and
select SD File
Download
.
2. Select Search to
display all the
recorded files on the
SD card. Double-click
any file to download
onto local PC. Select
Open download directory to view downloaded
files.
PROFESSIONAL
SURVEILLANCE SYSTEM
13
WIRELESS IP CAMERA SC200
To Next Page
Loading...