7 ANDROID DEVICES
INSTALL IP CAMERA > INSTALL APP > REGISTER AN ACCOUNT > ADD IP
CAMERA TO THE ACCOUNT > READY TO USE
1. Complete system installation according to Section 5.
IMPORTANT: DHCP service must be enabled on the network device.
* For first use, it is recommended that the Android device is connected via Wi-Fi
and IP camera is connected via network cable to the same local area network.
2. Before installation, ensure your android device has 3G/4G or WI-FI
internet connectivity. Go to Google play store search, download and install
p2pCamViewer.
3. After successfully installed,
Plug&Play
app logo will be available on your
android device screen.
4. Open the
Plug&Play
app.
5. Register account by pressing
Register
, fill in the information and then select
OK
to complete.
6. Go back to the main page of the Plug&Play app, login using the user name and
password previously registered.
7. After successful login, there are two network sections,
WAN
(for remote
connection) and
LAN
(local area network connection).
8. If the android device and IP camera is connected as
LAN
connection, cameras
within the
LAN
will show up automatically, no configuration or registering
required. IP cameras connected will be listed on the device list under
LAN
section, select the IP camera to view. If the IP camera does not show up on the
LAN
page, tap Button to
Refresh
the page.
9. For
WAN
option, press the
+
key located at the top-right hand corner to add
the IP camera.
PROFESSIONAL
SURVEILLANCE SYSTEM
6
WIRELESS IP CAMERA SC200
To Next Page
Loading...