9. If successfully added, the IP camera is available on the
WAN list page. Simply double click on the IP camera
for viewing.
10. When IP camera is connected, Pan/Tilt, Photo Snapshot,
Video Record and Audio Listen functions are enabled:
* To view recorded files, click settings, located near
the top-left hand corner, click
Monitor tab and then
double click on source address to go into recorded
files. Recorded files directory on PC can be changed in
this setting window.
11. For IP camera settings, point the mouse on to the
connected IP camera on the
WAN/LAN page and
right click on the mouse:
• For WAN connection the IP camera only able
to adjust the following settings: Change watch
password for change the IP camera access
password on the IP camera label,
Change the
device alias
for changing the device given name
and
SD card query for searching recorded video
on SD card.
• For LAN connection the IP camera can adjust the
following settings:
Change watch password for
change the IP camera access password on the IP
camera label,
Change the device alias for changing
the device given name,
Set Wi-Fi connection for
setting up Wi-Fi connection with wireless router
(press SCAN to search for Wi-Fi connection),
SD
card configuration
for SD card video record setting
and
SD file download for searching recorded video
on SD card.
Configure video quality settings by selecting camera video
and select camera setting button
.
* If experiencing video distortions and control delays,
reduce camera resolution, frame rate or data rate in video
settings menu.
* Change password immediately after completing setup to
protect your privacy.
Refer to Section 15 Change Camera Password.
Pan/tilt
motion control
Photo
Snapshot
Video Record Audio Listen
PROFESSIONAL
SURVEILLANCE SYSTEM
9
WIRELESS IP CAMERA SC200
To Next Page
Loading...