Orion SkyScanner BL 102mm - Telescope Assembly and Components; SkyScanner BL 102 mm Included Items

2
SkyScanner BL 102
Included Items
Unpack and identify all included items, using the list below and
Figure 1 for reference.
• SkyScanner BL 102mm optical tube
• Red dot nder scope
• 25mm Kellner eyepiece
• 10mm Plossl eyepiece
• 3x Barlow lens
• MoonMap 260
• Bottom ground plate (with feet and azimuth axis bolt
pre-installed)
• Top ground plate
• Side panel
• Side brace
• Eyepiece rack
• Assembly screw (x7)
• Tension knob (x2)
• Spring washer (x2)
• Flat washer (x2)
• Screwdriver (with interchangeable at and Philips bit)
• Dust cap
Dust cap
Optical tube
Tension knob
Tension knob
Eyepiece rack
Bottom
ground
plate
Top
ground
plate
Flat
washers
Spring
washers
25mm Kellner
eyepiece
3x Barlow lens
Red dot scope
10mm Plossl
eyepiece
Assembly
screws
Side brace/
handle
Side panel
Screwdriver
Figure 1. Parts of the SkyScanner BL 102mm Dobsonian.
Warning: Never look directly at the Sun through
your telescope—even for an instant—without a
professionally made solar lter that completely
covers the front of the instrument, or permanent
eye damage could result. Young children should
use this telescope only with adult supervision.