OWNER' S MAN U A L - 9
Three Channel Configuration
• Channels 1/2 are configured for 2-channel stereo operation.
• Channel 1/2 lowest recommended impedance is 2Ω stereo.
• Channels 3/4 are configured for a single channel bridged output.
• Channel 3/4 lowest recommended bridged impedance is 4Ω.
• Crossover mode, output, and gain configurations are indepen
dently adjustable between channels 1/2 and 3/4.
• Two-channel or four-channel input can be used for this configu
ration. For source unit fading, use the four-channel input mode.
• Channel 1/2 and 3/4 outputs can be configured for high-pass,
lowpass, or full range operation.
• Channel 3/4 outputs are configured for summed bridged opera
tion for subwoofer
Figure 3
Figure 4
Two Channel Bridged Configuration
XTR500.4,XTR750.4 and XTR1000.4
XTR1700.4 and XTR2500.4
XTR500.4,XTR750.4 and XTR1000.4
XTR1700.4 and XTR2500.4
To Next Page
Loading...
