Orolia VersaSync Getting Started Guide

3.
Add a pin configuration by clicking the PLUS icon in the top-right corner. The Add
Pin window will display.
4.
Start with the Type Filter drop-down menu (second line in the window) and select
a signal type.
5.
From the Signal drop-down menu, select a signal.
6.
From the Pins drop-down menu in line 3, select the pin pair you chose in Step 2.
(Note that you will need 4 pins if you selected a RS485 signal Type.)
7.
Click Submit.
8.
In the Actions panel, click Apply Changes.
Restoring the Default I/O Configuration
VersaSync is shipped with a default I/O configuration that you can be customized.
However, if required you can restore the default configuration at any time after applying
changes.
The following illustration shows the default I/O pin configuration:
24
VersaSync Getting Started Guide Rev. 8
2.3 Assigning I/O Pins

Orolia VersaSync Specifications

General

Brand	Orolia
Model	VersaSync
Category	Server
Language	English