Date Name Author(s) Rev Language Page
11/05/12 Settings_and_user_manual _Orpheo_TG TF 6 English 16/24
Group Channel Programming
It is possible to configure a group of receivers via the charging rack (the charging rack must
be connected to a power supply.
Connect the devices in receiver mode (from 1 to 23) in the charging rack. Reserve the Master
Slot to insert a device in transmitter mode (see schema below).
If, among these 23 devices, some are in transmitter mode, they will be switched
automatically to receiver mode.
(Colors modified for illustration only)
To Next Page
Loading...