Power dial: B
This is the most important
adjustability feature on the bike and
must ALWAYS start with the
slowest setting, and make changes
in very small increments. It may
appear that the highest power will
be suitable for an advanced rider,
but it must be understood that there
is a lot of power available. It is a
great feature to have such a range
available, but it MUST be treated
with respect. ALWAYS adjust from
lower to higher, in very small
increments.
Throttle response dial: C
It must be treated very carefully as
the range of adjustability is
enormous. THIS DIAL IS TO BE
ADJUSTED BY A RESPONSIBLE
ADULT ONLY. The function of this
dial is to adjust the ‘response’ of the
bike. Fully anti-clockwise will give
the slowest throttle response.
Fully clockwise will give the
quickest response. Refer to page
33 for instructions on setting these
controls.
CHARGE INDICATOR:
The battery charge indicator is located on
the throttle assembly and shows the state
of the batteries. The indicator lights can
be checked at any time to determine if
the main power is off or on. Always turn
the power off and remove the key when
the bike is not in use.
WARNING!
It is very important to keep everyone clear of the bike when changing and
checking the speed and response settings. The dial is sensitive to small
adjustments. Do not guess at changes. Always check before the rider gets back
on to ensure the desired setting is correct for the abilities of the rider.