18
WARNING!
Failure to maintain and adjust the chain and align the wheel correctly could result
in the chain jumping off the sprockets, causing a potentially dangerous and
damaging condition.
MOTOR PERFORMANCE & MAINTENANCE:
The OSET motor has been designed for high performance. Do not power wash
the motor. Check that the sprocket bolt is tight periodically. Water proof grease
can be applied around the shaft where it enters the motor for additional
protection from the elements. Similarly, a bead of silicone can be applied where
the casings join for additional weather protection.
WARNING!
The motor can get hot. It is designed to withstand high temperatures. However,
sustained maximum output is not recommended. The motor is designed to
withstand pulses of maximum output, not sustained.
SUSPENSION:
OSET’s feature adjustable front and rear suspension. The available adjustability
is a great feature. Separate owners manuals are provided. Please read for
further information on how to best set up the suspension.
Front Suspension:
The front suspension is an ‘air’ fork. A specific air pump is required to add
pressure. The fork is also adjustable for rebound with a simple dial.
Rebound dial. Fork air pump (not supplied)
Rear Suspension:
Your OSET is equipped with a single coil spring type rear shock. For a
harder/stiffer ride at the rear tighten the adjustment ring in a clockwise direction.
For a softer ride, loosen the adjuster by turning anti-clockwise. It also features a
To Next Page
Loading...
