OSIM uPure 2 - Operation; Purified water

16
Type C: For taps with a foaming cap (inner threaded)
• Remove the attachment nut
and Type A adaptor from the
uPure 2.
• Remove the foaming cap
from the tap.
2
• Using the attachment tool
provided, screw the Type C
adaptor onto the tap. Ensure
that the screw threads match.
6
4
• Put the attachment nut on
the tap head. Select a Type C
adaptor and fit it onto the tap.
5
Foaming
Cap
Preparation before use
1
Type A
adaptor
Attachment
nut
• The uPure 2 is now ready
for use.
• Tighten the attachment nut
to prevent water leakage.
3
Attachment Nut
Attachment Tool
Type C
Adaptor