OSIM uPure 2 - Page 19

17
3
Type D: For other types of taps (with straight spout)
• Remove the attachment nut
and Type A adaptor from the
uPure 2.
• Fit the Type D adaptor onto
the uPure 2. Ensure that the
screw threads match.
• Attach the Type D adaptor
onto the main unit
provisionally by turning it
about 360° clockwise.
• Holding the bottom of the main
unit, align the Type D adaptor
with the tap head. Push up firmly
and tighten the screws of the
adaptor evenly. Be sure to keep
the faucet pipe in the center of
the Type D adaptor.
• Turn the Type D adaptor
clockwise to secure it firmly
to the main unit.
• The uPure 2 is now ready
for use.
1
Type A
adaptor
Attachment
nut
Preparation before use
2
5
(Be sure to leave a little clearance
between the Type D adaptor and the
main unit.)
6
4