9
Troubleshooting
If you encounter problems with the operation of the uSqueez 2, please check the following
points to see if they can be rectified. If the uSqueez 2 still malfunctions or does not work,
please turn off the uSqueez 2 and remove the power plug from the electrical outlet. Contact
OSIM Service Center* for servicing.
Do not dismantle or attempt to repair the uSqueez 2 yourself. Doing so will void the
warranty and OSIM will not bear any responsibility for any subsequent consequences.
• Motor sound during operation.
Problem Possible causes / action
• The sound is the result of the mechanical
structure in operation and not a malfunction.
• The massage stops midway. • Auto timer for massage duration has lapsed.
• The ‘Stop’
button
[
]
on the control panel
was pressed accidentally.
• The overheat protection device may have
been activated. Turn off the main switch and
allow the uSqueez 2 to cool down at least 30
minutes before using it again.
* Please visit us at www.OSIM.com for information on the nearest service center.
Product warranty is valid only in the country of purchase.
• The uSqueez 2 will not start. • Ensure that the power plug is firmly
connected to the electrical outlet.
• Ensure that the main switch is turned on.
• The overheat protection device may have
been activated. Turn off the main switch and
allow the uSqueez 2 to cool down for at least
30 minutes before using it again.
To Next Page
Loading...
