25
13. Disinfection, Cleaning, Sterilization
Follow your country-specific directives, standards and guidelines for disinfection, cleaning and sterilization.
– Wear protective clothing.
– Disinfect and clean the motor immediately after every treatment!
– Sterilize the motor following disinfection and cleaning.
– Sterilize motor with cable and motor support prior to every use.
Control unit, foot control
Pre-disinfection
– If heavily soiled: Clean first with disinfectant cloths.
Manual cleaning and disinfection
The front panel of the control unit and the foot control are sealed and may be wiped clean.
– Disinfection with surface disinfectants, wiping disinfection is recommended.
– Use only surface disinfectants which do not contain chlorine and which are certified by officially recognized institutes.
For USA: Use EPA registered surface disinfectants.
– Note the dosage and the action time of the surface disinfectants used!
To Next Page
Loading...