16
Starting operation – Foot control
Changing program
The Programs 1 – 5 can be selected in ascending sequence by operating the ORANGE button.
When changing from Program 5 to Program 1, a longer confirmation signal is heard.
With each program change, the speed is automatically set to forward operation.
Pump ON / OFF
Only when the motor is stationary can the pump be switched on or off by operating the GREEN button of the foot control.
When pump operation is active, the pump symbol appears on the display.
Reverse operation
You can switch between forward and reverse operation by pressing the YELLOW button. On selecting reverse operation,
an audible signal can be heard and the selected Program button flashes. Before the motor starts in reverse operation,
3 audible warning signals are given.
To Next Page
Loading...
