28 2928
Telecoil (Optional)
The telecoil is a receiver for audio signals transmitted from an inductive loop installation.
The telecoil is meant for telephone* conversations and for loop systems in places such as
theatres, churches or lecture rooms.
The telecoil is activated by the push-button as switching between programs. When
activated, you will hear a certain number of beeps corresponding to the telecoil program.
See the Hearing Program Description on last page for where the telecoil program is
placed.
*Requires a telephone with built in tele-loop. Tele-loop is a common
standard for assisted listening and transmits the audio to the telecoil
in the hearing instrument.
DAI Direct Audio Input (Optional accessory)
The DAI adapter is a connector that allows you to input audio signals directly to your
hearing instrument.
The DAI adapter is mounted on the hearing instrument and is connected by a cord to an
external sound source, like a radio, music player or hand microphone.
Mounting of the DAI adaptor
Start by opening the battery door and slide the
DAI adaptor onto the instrument.
Then insert the DAI cord into the adaptor.
When the DAI adaptor is connected, the instrument will
automatically switch to a combination of a DAI program
and the microphone input of the instrument.
Instrument
Connector
DAI adaptor
To Next Page
Loading...
