EasyManua.ls Logo

oticon CROS - Maintenance and Volume Control

oticon CROS
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22 23
About Start-up Handling Warnings More info
IMPORTANT NOTICE
Always use the same type of wax filter as was originally supplied with the
transmitter. If you are in any doubt about the use or replacement of wax
filters, contact your hearing care professional.
ProWax miniFit lter
The dummy speaker has a white wax filter
attached to the end with the earpiece. The
wax filter keeps wax and debris out of the
dummy speaker. It has no acoustic purpose.
Replace the filter for hygienic reasons
when clogged.
Remove the earpiece from the dummy
speaker before replacing the wax filter.
Wax filter
Change volume on the transmitter
The push button on the transmitter allows you to adjust the volume of
the transmitted sound. You will hear a high pitch beep in the hearing aid
when you increase or decrease the volume.
MAXIMUM
START-UP VOLUME
MINIMUM
Press button to
increase volume
Press button to
decrease volume
Continues on next page

Related product manuals