26 27
About Start-up Handling Warnings More info
Mute
Use the mute function if you need to temporarily turn off the
transmission of sound to the hearing aid. The mute function mutes the
microphones on the transmitter.
IMPORTANT NOTICE
Do not use the mute function as an off switch, as the transmitter still draws
current from the battery in this mode.
To mute the transmitter
Press either end of the push button for
at least four seconds.
To reactivate, press either end of the
button briefly.
Sound indicators
Different sound indicators help to communicate the status of your
transmitter. The sounds will be transmitted to your hearing aid.
Volume Sound
Start-up volume
2 high pitch beeps
Minimum / maximum volume
3 high pitch beeps
Volume up / down
1 high pitch beep
Warnings Sound
Battery low indication
3 high pitch alternate tones
Battery shut down
4 high pitch descending tones
Microphone service check needed
8 high pitch beeps repeated 4 times
To Next Page
Loading...
