EasyManuals Logo

oticon FittingLINK WP-2 User Manual

oticon FittingLINK WP-2
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
46 47
Warnings Warnings
Please note that other active FittingLINK devices and wireless hearing instrument
accessories in proximity may create interference and should be turned off.
Use of the neck loop
The neck loop is an antenna for the magnetic induction link to the hearing instruments.
If the neck loop should accidentally get caught on something while the client is wearing
it, the neck loop is constructed to release automatically. Therefore, never try to shorten
or modify the neck loop in an unauthorised way.
Always use the provided clip to shorten the length of the neck loop.
If the neck loop breaks, it cannot be repaired and must be replaced immediately. Consult
your local supplier for replacement.
Please refer to “How to use FittingLINK on children”.
Rechargeable battery
Do not attempt to open FittingLINK, as it may damage the battery.
Never attempt to replace the battery. If battery replacement is needed, please return
your device to the supplier. The service guarantee is void if there are signs of tampering.
The safety of recharging batteries using a USB connector is determined by the external
signal source. When connected to external equipment plugged into a wall outlet, this
equipment must comply with IEC-62368 (or IEC-60065, IEC-60950 until June 20, 2019)
or equivalent safety standards.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the oticon FittingLINK WP-2 and is the answer not in the manual?

oticon FittingLINK WP-2 Specifications

General IconGeneral
Brandoticon
ModelFittingLINK WP-2
CategoryHearing Aid
LanguageEnglish

Related product manuals