16 17
Please note that if you charge via a USB hub, some hubs do not deliver enough power
to actually charge FittingLINK. In this case we recommend use of the provided charger
instead.
Only recharge FittingLINK using the provided charger or a stabilised USB hub/charger
that provides 5VDC and ≥500 mA.
IMPORTANT NOTICE
When using the USB cable, always insert the USB cable into FittingLINK before
connecting the cable to other equipment.
Charging FittingLINK without the charging cradle
If you prefer not to use the charging cradle when charging FittingLINK, you have the
option to insert the USB cable directly into FittingtLINK instead of the charging cradle.
To Next Page
Loading...
