28 29
About Getting started Daily use Options Tinnitus Warnings More info
IMPORTANT NOTICE
Ensure you always use the same type of wax filter as originally supplied
with the hearing aid. If you are in doubt about the use or replacement of wax
filters, contact your hearing care professional.
Replace ProWax miniFit lter
2. Remove 3. Insert
Remove the tool from
the shell. The tool has
two pins, one empty
for removal and one
with the new wax
filter.
Insert the empty pin
into the wax filter in
the speaker and pull
it out.
Insert the new wax
filter using the other
pin, remove the tool,
and throw it out.
1. Tool
New
filter
New
filter
Empty
pin
Old
filter
Final
Note
If you use a mold or LiteTip, your hearing care professional must replace the wax filter in the speaker.
ProWax miniFit lter
The speaker has a white wax filter
attached to the end where the earpiece
is attached. The wax filter keeps earwax
and debris from damaging the speaker.
Ensure you replace the filter when
clogged, or if the hearing aid does not
sound normal. Alternatively, contact your
hearing care professional. Ensure you
remove the earpiece from the speaker
before replacing the wax filter. To do this,
see the Replace standard earpieces
section.
ProWax filter
To Next Page
Loading...
Need help?
General
