oticon Nera Pro - Customised Earpieces: Micro Mould and Litetip; Clean the Micro Mould or Litetip

24 25
About Start up Handling Options Warnings More info
Customised earpieces: Micro mould and LiteTip
There are 2 dierent types of moulds: Micro mould and LiteTip. The
moulds are customised for your ear shape.
Clean the Micro mould or LiteTip
The earpiece should be cleaned
regularly.
The wax lter in the earpiece
should be replaced when
clogged or when the hearing aid
does not sound normal.
LiteTip
VarioTherm®
LiteTip*
Micro mould
VarioTherm®
Micro mould*
® VarioTherm is a registered trademark of Dreve
* VarioTherm Micro mould and LiteTip do not have a wax lter
Wax lter
The vent is cleaned
by pressing the brush
through the hole,
twisting it slightly.
Vent
IMPORTANT NOTICE
Always use the same type of wax lter as was originally supplied with the
hearing aid. If you are in any doubt about the use or replacement of wax
lters, contact your hearing care professional.