Installation Procedure
TM7530HP
Tank Monitor
and Hydrostatic
Pressure Sensor
ation Proce
ur
753
HP
nk M
nit
r
H
rostatic
ss
r
S
ns
Do not
pressure wash
WARNING Substitution of components may impair intrinsic safety.
For outdoor use only. Explosion Hazard - Batteries must only be
changed in an area free of ignitable concentrations. Do not open when
an explosive atmosphere is present. Potential electrostatic charging
hazard - wipe only with a damp cloth.
BATTERY REPLACEMENT Battery replacement must only be performed
by OTODATA Wireless Network Inc. factory to maintain intrinsic safety
protection of the TM7530HP. Cover shall not be opened when an explosive
atmosphere is present.
IMPORTANT It is critical in all
installations to ensure monitors’ antenna
is positioned vertically. This will achieve
optimal signal strength, ensuring that
you receive data in a timely manner and
prolong the battery life of the monitor.
PLEASE TAKE A MOMENT TO CAREFULLY READ
THE INSTALLATION INSTRUCTIONS INCLUDED
WITH YOUR MONITORS, AND ENSURE YOU
UNDERSTAND AND RESPECT LOCAL
REGULATIONS.
GRA-0034 - EN Rev: 001
To Next Page
Need help?
General