otometrics Aurical Hit - 7 Other references; 6.1 Cleaning; Adapters; 8 Standards

6.1 Cleaning
There are no specific requirements to sterilization or disinfection of the device.
Cleaning the device
Make sure that the device is kept clean and free of dust:
• Remove dust using a soft brush.
• To clean the cabinet, use a soft, slightly damp cloth with a small amount of mild detergent on it.
Caution• Keep the unit away from liquids. Do not allow moisture inside the unit.
Adapters
If needed, remove any acoustic putty residue, and use an alcohol based wipe to clean the adapter.
7 Other references
For more information, see the following manuals on your product CD:
• AURICALHIT and the OTOsuite HITModule Reference Manual (English only)
• AURICAL FreeFit and the Probe Microphone Measurements Module Reference Manual (English only)
• OTOsuite SOftware User Manual
See also the OTOsuite Installation Guide provided in the OTOsuite software DVD box.
8 Standards
AURICALHIT CE-marked according to the Electrical Safety Directive IEC 61010-
1
Test standards ANSI S3.22
IEC 60118-7
EMC IEC 61326-1
9 Operating environment
Operating environment Indoors
16 Otometrics - AURICALHIT
7 Other references