(MODE) for 3 seconds, the meter power off, and the
controller power off. If you are not riding for 10
minutes (time can be set by the user) and the meter is
not operated, the meter will automatically turn off
the power. In the off state, the power consumption of
the meter and controller is zero.
The instrument boot display
interface is shown in Figure
1.
2) Speed mode
switching
Real-time SPEED → maximum SPEED → average SPEED
(AVGSPEED).
The display interfaces of speed mode and cycling
time are shown in Figure 2, Figure 3 and Figure 4.
Long press the key and the key can be switched speed
display information, circular display
Start working, turn on the controller power; Long
press the key while on
To Next Page
Loading...
