Ourmeter LD-S700 - System Parameter Setting

There are two modes of short press and long press,
and the specific use method is customized according
to customer requirements.
See Figure
13
6. System
parameter setting
Set the state (Figure 14), in which the instrument
parameters can be set, and then
Can automatically
exit the setting
state.
Long
press
The
key
and
Key to exit setting state or no
operation (10s)
In the boot state, long press the key and the key to
enter the system parameters
Display the Walk
sign, release
Key (or again
long press
Key
3
Second or press the button once), the electric bike
will exit the walking mode.Out of line