OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
info@outline.it
www.outline.it
2
INDICE
1. SAFETY REGULATIONS ..................................................................................................3
1.1. DISPOSAL OF WASTE MATERIALS ....................................................................................................... 3
1.2. CONFORMITY AND WARRANTY ............................................................................................................ 3
2. COMPONENTS OVERVIEW .............................................................................................4
2.1. LOAD CAPACITY .................................................................................................................................... 4
2.2. FRAME BAR SPECIFICATIONS ............................................................................................................. 5
2.3. INTEGRATED HARDWARE OF LINE ARRAY ELEMENTS ...................................................................... 7
2.4. LOCKING PINS ...................................................................................................................................... 8
2.5. HARDWARE INSPECTION ..................................................................................................................... 9
3. OPEN ARRAY 2 - PRE-RIGGING .....................................................................................10
4. RIGGING PROCEDURE ...................................................................................................13
4.1. PREPARATION ...................................................................................................................................... 13
4.1.1. SPLAY ANGLES .............................................................................................................................................. 13
4.1.2. PREPARATION OF THE FRAME BAR ............................................................................................................. 15
4.2. ASSEMBLING ........................................................................................................................................ 17
4.3. INTERMEDIATE PHASE ........................................................................................................................ 19
4.3.1. RIGGING THE CABLES ...................................................................................................................................19
4.4. FINAL PHASE ........................................................................................................................................ 20
4.5. DERIGGING ........................................................................................................................................... 21
4.6. GROUND STACK CONFIGURATION ...................................................................................................... 22
5. TRANSPORT AND STORAGE ..........................................................................................24
To Next Page
Loading...